At about 185s the narrator says pi/2 is 'about 1.7'; it is about 1.57. A non-pausing note at 187.2s gives the correct value.
The check-ins use the correct version. The video is Khan Academy's, unchanged.About this video
A one-parameter parametric function, like f(t) = (t cos t, t sin t), takes a single input t and outputs a vector. Instead of graphing it, we look only in the output space and trace the tips of the output vectors, which here draws a spiral as t goes from 0 to 10. This shows the shape of the curve but loses information about which input lands where, and different functions can parameterize the same curve.
You'll be able to
- evaluate a parametric function such as f(t) = (t cos t, t sin t) at simple inputs.
- explain how a parametric curve is drawn by tracing output points.
- explain what information is lost when we only look at the output space.
- explain what it means for a function to parameterize a curve.
Key words
- parameter
- A fancy word for the input of a parametric function, here t.
- parametric function
- A function with a single input that outputs a vector, drawn as a curve in the output space.
- output space
- The space where the function's outputs live; here the two-dimensional plane.
- parameterize
- A function parameterizes a curve if drawing its outputs traces out that curve.
Transcript
- [Voiceover] More function visualizations. So let's say you have a function that's got a single input t. And then it outputs a vector. And the vector's gonna depend on t. So the x component will be t times the cosine of t. And then the y component will be t times the sine of t.
This is what's called a parametric function. And I should maybe say one-parameter parametric function. One parameter. And "parameter" is just kind of a fancy word for input. Parameter. So in this case, t is our single parameter. And what makes it a parametric function is that we think about it as drawing a curve and its output is multidimensional.
So you might think, when you visualize something like this, ah, it's got, you know, a single input. And it's got a two-dimensional output. Let's graph it. You know, put those three numbers together and plot them. But what turns out to be even better is to look just in the output space.
So in this case, the output space is two-dimensional. So I'll go ahead and draw a coordinate plane here. And let's just evaluate this function at a couple different points and see what it looks like, okay. So I might, maybe the easiest place to evaluate it would be zero.
So f of zero is equal to, and then, in both cases, it'll be zero times something. So zero times cosine of zero is just zero. And then zero times sine of zero is also just zero. So that input corresponds to the output. You could think of it as a vector that's infinitely small or just the point at the origin, however you want to go about it.
So let's take a different point, just to see what else could happen. And I'm gonna choose pi halves. Of course, the reason I'm choosing pi halves, of all numbers, is that it's something I know how to take the sine and the cosine of. So t is pi halves, cosine of pi halves.
And you start thinking, okay, what's the cosine of pi halves? What's the sine of pi halves? And maybe you go off and draw a little unit circle while you're writing things out. Whoops. See the problem with talking while writing. Sine of pi halves. And you know it's, if you go off and scribble that little unit circle.
And you say pi halves is gonna bring us a quarter of the way around. Over here. And cosine of pi halves is measuring the x component of that. So that just cancels out to zero. And then sine of pi halves is the y component of that. So that ends up equaling one.
Which means that the vector as a whole is gonna be zero for the x component and then pi halves for the y component. And what that would look like, you know, the y component of pi halves is about 1.7 up there. There's no x component. So you might get a vector like this.
And if you imagine doing this at all the different input points, you might get a bunch of different vectors off doing different things. And if you were to draw it, you don't want to just draw the arrows themselves. Because that'll clutter things a whole bunch.
So we just want to trace the points that correspond to the output, the tips of each vector. And what I'll do here, I'll show a little animation. Let me just clear the board a bit. An animation where I'll let t range between zero and 10. So let's write that down.
So the value t is gonna start at zero. And then it's gonna go to 10. And we'll just see what values, what vectors does that output. And what curve does the tip of that vector trace out? So there it goes. All of the values just kind of ranging, zero to 10. And you end up getting this spiral shape.
And you can maybe think about why this cosine of t, sine of t scaled by the value t itself would give you this spiral. But what it means is that when you, you know, we saw that zero goes here. Evidently, it's the case that 10 outputs here. And a disadvantage of drawing things like this, you're not quite sure of what the interim values are.
You know, you could kind of guess. Maybe one goes somewhere here. Two goes somewhere here. And you're kind of hoping that they're evenly spaced as you move along. But you don't get that information. You lose the input information. You get the shape of the curve.
And if you just want, you know, an analytical way of describing curves, you find some parametric function that does it. And you don't really care about the rate. But just to show where it might matter, I'll animate the same thing again, another function that draws the same curve.
But it starts going really quickly. And then it slows down as you go on. So that function is not quite the t cosine t, t sine of t that I originally had written. And in fact, it would mean that, let's just erase these guys. When it starts slowly, you can interpret that as saying, okay maybe...
Well, actually, it started quickly, didn't it? So one would be really far off here. And then two, we kind of zipped along here. And three, you know, still going really fast. And then maybe by the time you get to the end, it's just going very slowly, just kind of seven is here, eight is here, and it's hardly making any progress before it gets to 10.
So you can have two different functions draw the same curve. And the fancy word here is "parameterize." So functions will parameterize a curve if, when you draw just in the output space, you get that curve. And in the next video, I'll show how you can have functions with a two-dimensional input and a three-dimensional output draw surfaces in three-dimensional space.
Video © Khan Academy, used under CC BY-NC-SA. Watch on Khan Academy. Puzzicle is not affiliated with Khan Academy.